AUTOMATIC BOTTLE WASHING MACHINE

MODEL: CE-16H/XPJ

BRAND: FULLWELL

Feature :

 The automatic bottle washer is suitable for the washing and disinfection of glass and plastic containers such as alcohol, beverage, daily chemicals and seasonings. This machine can be used alone or in various production lines. The working principle of the bottle washer is to mechanically turn the washed bottle on the fixed rail, spray the bottle with hot water of different temperatures through the central distributor, and then perform blanking to remove the residual water in the bottle. The water after flushing is returned to the water tank by the collection tank for recycling. Automatic hydration begins when the liquid level in the tank is below the upper limit of the liquid level.

This machine adopts rotary type, and enters the bottle while one side enters the bottle. After the bottle enters the automatic bottle inlet dial, the robot grabs the bottle mouth, the manipulator flips and rotates, the bottle stands upside down with the robot, and the vertical position is aligned with the nozzle. After the internal flushing began, after 8-10 seconds, the flushing was over and the water control was started. After 4-7 seconds, the robot straightened the bottle and entered the bottle dial. The bottle reached the conveyor line and the bottle was finished.

• The machine adopts powerful mechanical clamping jaws. The parts are precision cast from 304 stainless steel. It is stable and reliable. The parts are inlaid with PTFE and synthetic rubber.

• The equipment is controlled by frequency conversion. The height of the bottle can be adjusted electrically. The inlet and outlet bottles are equipped with overload protection device, and the bottle bottle is stopped for convenient operation.

• Each jaw part is equipped with a control water spray device, which does not flush the water and saves water economy.

• Reliable water dividing valve, can adjust the time ratio of flushing and water control arbitrarily, ensuring clean and clean control. According to customer needs, it can be changed into two or three flushes to wash the bottle with disinfectant or filling medium.

• The equipment is equipped with an adjustable bottle screw to ensure the bottle enters the dial smoothly.

• The main components of the equipment are made of 304 stainless steel.

Specification :

Model : CE-16H/XPJ

Brand : FULLWELL

Material : Stainless Steel 304

Washing Head : 16 Head

Bottle : 180 – 300mm

Motor : 1.5Kw

Power : Single Phase, 220V, 50Hz

Capacity : 2000-2500bottle/hour

Machine Size : 1560mm X 1650mm X 2000mm

Monobloc 3 in 1 JUICE Production Line

MODEL :CE-WFC18–18-3

BRAND: FULLWELL

Product Application :

• CE Series mineral water production machine is a new type equipment, which base on 25 years’ usual practice and adopt the advanced technology, and absorb many clients’ views. 2.It meets the client’s requirement about filling different bottle size through one set.

• The suspension card bottleneck is adopted to make changing the bottle size more convenient.

• Mineral water production machine is mainly used to non-carbonated beverage (pure water and mineral water).

Main Features :

1. The mineral water production machine is used in production of non-soda drink of fruit juice, fruit wine, minerals and pure water packed in polyester bottles. Automatic Washing, filling and capping are integrated in one machine.

2. The most advanced technology from Japan and Germany is employed in this design. The gravity fixed liquid surface filling is used. The mineral water production machine is fast, the amount of liquid is accurately controlled and the dropping and leakage are avoided.

3. Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180°along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.

4. The magnetic torque is used for screw capping. The power of screw capping can be adjusted steplessly. The power of the mineral water production machine can also be fixed, and the caps will not be damaged, the capping is reliable.

5. The mineral water production machine is controlled by PLC with touch-screen as the human-machine interface. The amount of the drinks in the storage tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle. 6.When bottles are cramped wrongly or when caps are not available, the mineral water production machine can be stopped automatically.

Specification :

Model : CE-WFC18-18-3

Production Capacity (500ml/B/H) : 2000-2400

Filling Heads : 18

Washing Heads : 18

Capping Heads : 3

Diameter of Bottle mm : φ40-φ100

Height of Bottle(mm) : 130-280mm

Air Pressure Mpa : 0.5Mpa

Power : 3.42KW

Dimension : 1850X1450X2000 mm

Weight : 2000kg

ROUND LABELLING MACHINE

BRAND :FULLWELL

MODEL :CE-200/MT

Machine Details:

The servo motor system.
1. Clutch design, make the label tension force more stable, and easy to improve labeling precision.
2. Advanced color man-machine interface control system.
3. Germany Siemens PLC control, high reliability.
4. Use Germany, Japan magic eye.
5. Machine structure is simple, compact, easy to operation and maintenance.
6. Can add ribbon typewriter, or heat transfer machine and automatic send bottle opener (optional).

Technical Parameters:

Machine Design: